Smart Control Solution
HibouAir monitors & SmartHub SSD060 as a complete package

The Smart Control Solution combines HibouAir air quality monitors with the HibouAir SmartHub SSD060 to turn real-time indoor measurements into automatic actions. Instead of only seeing air quality data, your building can respond to it with ventilation and HVAC control—based on configurable thresholds and control rules.
Buy as a solution
Tip: If you already have HibouAir monitors, you can add SmartHub to enable automated control.

From Monitoring to Real Control

A complete solution where measured indoor conditions can automatically trigger actions.

  • Live data from HibouAir

    The solution uses HibouAir sensors as a trusted source for indoor air data. SmartHub reads values in real time and evaluates them against defined rules.

  • Programmable control logic

    Set threshold limits and response actions. SmartHub can switch devices, control analog outputs, or integrate with building automation systems.

  • Outputs to ventilation & HVAC

    Control fans, dampers, actuators, and HVAC systems using 0–10 VDC or isolated relay outputs.

Air Quality Driven Automation

A solution you can deploy easily

The goal is to remove guesswork from building air quality response. A monitor-only setup can show issues, but it still depends on manual decisions. The Smart Control Solution adds the missing piece: automatic response when measured values reach your defined thresholds.

Whether you control a single room or multiple zones, the solution supports structured setup: select the sensor, define the control behavior, validate output response, and keep the configuration consistent across similar installations.

What You Get in the Smart Control Package

This solution is sold as a complete set, so you can deploy faster and configure everything with a consistent workflow.

SmartHub SSD060

The control hub that converts sensor readings into outputs. Configure locally using Bluetooth and integrate outputs to ventilation and HVAC equipment.

HibouAir Monitors

One or multiple HibouAir devices provide indoor measurements. In the app, you select which sensor SmartHub should use as the live data source for control.

SmartHub Mobile App

Setup and configure SmartHub via Bluetooth: connect, select target HibouAir sensor, then set CO2 and temperature thresholds to drive outputs.

How the Smart Control Solution Works

A simple setup flow that mirrors how installations happen in real buildings.

Install SmartHub

Mount SmartHub near the control equipment and connect the required output (0–10VDC or relay) to ventilation or HVAC inputs.

Select Data Source

Use the mobile app to connect to SmartHub and choose which HibouAir monitor provides the air quality data.

Configure Control Logic

Define CO2 and temperature thresholds that determine when outputs activate, scale, or reset.

Run Automated Control

SmartHub continuously evaluates live sensor data and triggers ventilation or HVAC actions based on real indoor conditions.

The app configures SmartHub locally via Bluetooth. It does not measure air quality by itself.

Integration Options

Local control or building automation integration

The Smart Control Solution supports both local setup and industrial integrations. Teams can start with Bluetooth configuration for fast rollout, then connect SmartHub into control environments where Modbus is already used.

This flexibility allows you to align the solution with your building infrastructure—whether you need a simple control response for a standalone space or a standardized approach across multiple sites.

Bluetooth enabled

Use the SmartHub mobile app for local setup: connect, select HibouAir sensor, and configure control thresholds. Ideal for quick installations and on-site adjustments.

Modbus / RS485 integration

Integrate SmartHub with building automation systems using Modbus RTU / ASCII over RS485/RS422. Suitable for standardized deployments and control environments that require industrial protocols.

Powerful & Industrial-Ready

Built for real installations

SmartHub SSD060 is designed as an industrial-grade control unit, supporting both local setup and field integrations. The goal is a stable deployment that installers and facility teams can replicate across similar spaces.

If you need deeper technical details, you can link to your existing SmartHub product page or datasheet from here.

Datasheet SSD060

Where This Solution Fits Best

Designed for indoor spaces where measured conditions should automatically drive ventilation and HVAC behavior.

Offices & Meeting Rooms

Maintain consistent air quality by automatically increasing ventilation when indoor CO2 rises during occupancy peaks.

Schools & Classrooms

Reduce the dependency on manual window opening or fixed schedules by using real measurements
to drive control.

Healthcare & Public Buildings

Improve comfort and operational consistency by reacting to indoor conditions instead of running
ventilation at a constant level.